メインコンテンツにスキップ

iPhoneの第4代目で、修理はそのままパーツを直接交換するだけです。しかし、正面ガラスとLCDはセットで交換する必要があります。容量はGSM / 8,、16m32 GB / モデル番号 A1332 /本体カラーは黒と白色

2375回答 すべてを表示

iPhone 4 won't power on, already replaced: dock connector, battery.

No spill damage.

I had trouble a few days ago, it didn't turn on after depleted battery, and wouldn't charge. I replaced the battery and it turned on and it was charging normally. It was an old battery that didn't last more than half a day, so it died overnight as well, wouldn't charge next morning (same story twice basically). I bought another battery, didn't work, I replaced the dock connector, didn't work as well.

I'm running out of ideas. I have a decently working spare logic board (water damaged, has occasional reception issues) but I'd really like to fix it without replacing the main board.

Does anybody have any ideas what else to try?

Also, it doesn't show up in iTunes, DFU mode doesn't work, so basically it doesn't work at all.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア -1
コメントを追加

1 件の回答

最も参考になった回答

It's possible that the solder on battery connector on the logic board has lifed slightly causing no power

このアンサーは役に立ちましたか?

スコア 1

1件のコメント:

Just tried wiggling it in all directions, no dice. I'll replace the logic board now, too bad I don't have any decent backups

さんによる

コメントを追加

回答を追加する

Ploki さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 72