修理を始めるには コミュニティ ストア

Appleによるポータブルタブレットコンピューターの全ての修理マニュアルです。修理にはヒートガンや注意深いこじ開け作業が伴います。

5762回答 すべてを表示
締切られた回答

オプション

After replacement of screen, it keeps getting loose

Hello there,

I have tried replacing the screen on two different iPads (iPad 2 and iPad 4). The same thing happens everytime, after some time (from ½ hour to a week) the screen goes loose in lower left corner.

This is due to the digitizer cable pushing up on the screen. But I cannot seem to figure out how to avoid this ?

I have watched several videoes and really taking note on how the cable is located at disassembly but no matter how good I "tuck" it in, the cable seems to "go loose" when I lay the glass on the iPad.

What do you do to avoid this?

Thank you in advance!

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

3件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

Hi there this is a common mistake in laying the ipad glass down the cable should not be folded under and resting on the glass it fits down that little gap it's coming out off..

When taking the old screen out replicate the folds and bends it's a tricky part to get right ..

このアンサーは役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

オプション

Not only is "the tuck" of the digitizer cable extremely important (especially on the iPad 2), but a good quality adhesive kit is also key. I found these guys last year, and will never go back to standard adhesive kits:

http://bowlertech-adhesives.com

このアンサーは役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

オプション

Thank you con and brianalt !

I did thought that the cable was actually supposed to fold a little bit under the glass, otherwise is quite difficult to sit with the lens in one hand, laying the lcd with the other and tightening the screws :-) But practice makes perfect I guess.

I have also tried ordering some bowlertech-adhesives to see if they are as good as they say. Looking forward to trying.

Thanks both of you!

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 8,707