メインコンテンツにスキップ

iPhoneの第2世代モデル。モデル番号はA1241 / 8 もしくは16 GBの容量/ ブラックもしくはホワイトのプラスチック製背面ケース。修理はオリジナルiPhoneに比べて直接パーツに作業ができます。ドライバー、こじ開けるためのツールと吸盤カップが必要です。

1158回答 すべてを表示

Home button not working, even after I replaced it

I've fixed about a dozen iPhone's so far (I usually do it for friends, who have a broken screen or LCD or something). Today I replaced somebody's home button, cuz it was broken. It could be pressed (it popped in and out just fine) but nothing would happen.

Because the guy had only told me that his homebutton wasn't working I thought that the button itself was broken and ordered a new one.

Now that I've taken the old button out, put the new one in and reassembled everything, nothing has changed. This doesn't surprise me much as the button I took out seemed to be good...

Can anyone give me a hint on whatelse could be the problem?

I figured it must be either a software problem or the mainboard, but if there's anything I could do to fix the problem I'd be glad to know!

Thank you guys!!

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 2
1件のコメント

I feel like a noob!

I just replaced the entire dock connector, like you suggested.

Turns out the button still isn't working. I then put in a different mainboard, just to get the same result - the home button is not working.

I've now tried replacing every 1 of the 3 parts which I believe can cause the home button to not work a all: Mainboard, Dock Connector, Home Button itself

I really doubt that both mainboards I tried have broken contacts, and the dock connector and home button are both new and have no scratches etc.

WTF is wrong with my iPhone?

ANYONE?

thx

さんによる

コメントを追加

6件の回答

ベストアンサー

Hi,,

I have just had exactly the same problem. After scratching my head for a while trying to figure out why it was not working. I thought i couldnt loose much by spending $15 on a new dock connector unit that the home button contacts go onto.

After spending ten minutes putting it in, turned it on and the hey presto, the home button worked fine.

So, i would go for replacing the dock connector unit.

Cheers, Chris.

このアンサーは役に立ちましたか?

スコア 3

1件のコメント:

Thanks for the advice. After replacing the mainboard I figured that it must be the dock connector.

I tried to replace only the flex cable though - but I messed up soldering the cable to the connector unit.

Now I'm waiting to receive the dock connector assembly. We'll see how it turns out.

さんによる

コメントを追加

Hi,

I have the same problem and am just about to order an dock port, however i'v just surfed the net and someone with the same problem mentioned the two copper prongs that make contact with the dock port. He said that his were slightley bent/curled up so he carefully staightened them and the home button worked!!

I dont know if this will help, but it worth a look :)

Bev

このアンサーは役に立ちましたか?

スコア 1

1件のコメント:

when you bend the iphone 3g home button connectors are you supposed to make them flat or are you supposed to bend the upward ( straight in the air)

さんによる

コメントを追加

lift them up in the air- they are incredibly fragile...sometimes it's just easier to get the flex! i'd also clean all the contacts for home button before buying dock connector

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

Hi need help

i just broke one of the home button prongs by an accident just wondering is there anywhere i could buy a new frame with the prongs to replace it for a reasonable price

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

go on ebay and just buy the flex. couple of $.there are other sources out there... I just like the fact that i can see feedback on items.

さんによる

コメントを追加

spam

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

Alternativly you could solder a new one on, or solder a tiny bit of copper wire bent in a V contacting at the same point. Hope this has helped.

さんによる

コメントを追加

the two prongs have to be straight if bent, button wont work,run along the prongs with a small screwdriver till straight then home button will work

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Nick Holtappels さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 19,579