メインコンテンツにスキップ

7.9インチのディスプレイ、モデル番号A1432、黒と白色のモデル、発表日は2012年10月23日、サイズは16、32、64GBがあります。

220回答 すべてを表示

Screen glitches and pixely after replaced digitizer

I recently replaced the digitizer on a friends ipad mini and when i rebooted it the screen is very pixely and is jumping around and is glitchy. Ive tried reconnecting everything and i dont think its the digitizer causeing the problem because i disconnected it and it still was acting this way.

these are some pictures they are not blurry the screen looks like that

http://imgur.com/a/vPRaQ

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア -1

1件のコメント:

a picture go's a long way. update with a picture.

さんによる

コメントを追加

1 件の回答

That is an LCD problem.

Disconnect battery first, then take off the LCD and reseat the connector. Look closely for any accidental damage to the motherboard. If you don't see any (most likely case), then order a new LCD to solve.

It is very very common to damage the LCD in the iPad mini on removal---especially if it is a 4G model with tape at both top and bottom.

jessa

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

ropesgames さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 319