メインコンテンツにスキップ

iPhoneの5代目となるiPhone 4S。このデバイスの修理は比較的簡単で、スクリュードライバー、開口ツールと忍耐が必要です。GSM/CDMA / 16, 32, 64 GB / 白と黒

2189回答 すべてを表示

Determine spare part after disassemble. TOUCH won't work

Hey

After i switched from broken screen to a brand new, the touch on the screen won't work. The screen seems fine, but i doesn't react on touch at all...

I figured out that i have one spare part, wich i can't seem to find out, where it should be placed.

Can you help me find out what the part is for and does it have anything to do with the touch feature?

The spare part after reassemble

Block Image

Block Image

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア -1
コメントを追加

1 件の回答

最も参考になった回答

That's the battery ground clip goes under the battery connector..

Make sure the digitizer cable is fully seeded if it is an still no touch then it has been damaged during install..

Or was faulty to begin with

このアンサーは役に立ちましたか?

スコア 2

2 件のコメント:

Ok i figured out where the part belongs, but i guess i can only try to see if the cables to the screen, are correctly installed or else the screen must be broken then...

さんによる

It's the cable just to the right of the back camera.

さんによる

コメントを追加

回答を追加する

Michael さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 57