評価: 21
3
10
The computer will simply turn on, the LED light shining and the initial screen flicker.
I noticed that the vast majority of the water damage is around the RAM.
What do I need to do to get this thing running again?
この質問は役に立ちましたか？
評価: 8千
41
26
10
Try holding down Option and see what shows up, if anything.
Try putting the install DVD into the MacBook and as you start up, press and hold D
Is the LED light steady? or does it blink a certain amount of times?
このアンサーは役に立ちましたか？
評価: 13.3千
45
21
11
Remove the battery, power chord and topcase and let it dry. Remove the RAM and harddrive. Clean any suspected area with isopropyl alcohol. Don't use a blow dryer! Put everything back together and start it from the system disk - good luck.
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 0
過去 30 日: 0
今までの合計 1,194
1件のコメント
It has been cleaned with alcohol and no blow dryers. The LED light is steady. I'll do the other suggestions and update in a bit.
Michael Swenson さんによる