メインコンテンツにスキップ

MacBook Proの13インチディスプレイ搭載モデルの修理情報・ガイドです。

9712回答 すべてを表示

Hinges have gone bad.

I believe my hinges have gone bad on my MacBook Pro. The display will occasionally flash and then look like stage lights shining up on the screen. Any suggestions on what I should do and can I fix it through items on ifixit?

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア -1
コメントを追加

1 件の回答

ベストアンサー

You need to obtain the recommended tools for opening the machine (every job is easier when you use the proper tools), Follow the guide to open the machine so you can tighten the screws on the clutches (Mac speak for hinges).

Before tightening back them out a bit and put a single drop of Loctite™ on the threads.

If this answer is acceptable please remember to return and mark it.

このアンサーは役に立ちましたか?

スコア 1

2 件のコメント:

What about the display flaking out on me? Will tightening these screws help with that as well or is something else needed?

さんによる

Check the condition and connector on the LVDS cable… I think the extra play is shorting your connection and once you get the slack out of it you should be OK - unless the slack has allowed the cable to be cut/nicked. If you see cuts nicks you could try using some silicone to seal the short. I wouldn't loctite the threads until I knew I didn't have to go back in and replace the LVDS cable.

さんによる

コメントを追加

回答を追加する

benandem98 さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 208