オプション

Display issue (with flicker) after installing SSD

I managed to replace HDD with SSD and everything was fine. 3 days later, after I installed Adobe Master Collection and reboot the computer, the display became very weird. The attached image is where I need to login to Mavericks. I can login but the screen flashes and appear to be some Cyan. I tried to Bootcamp with Win7 but the issue still existed. Can anyone help? I'm thinking to replace current 2x2G RAM into 2x4G first.

PS. It returned to normal status once after several minutes, but the luck was no longer with me yesterday.

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア -1

1件のコメント

I fixed this issue by reinforcing every plug, as I presume the GPU should not be broken (I never run any complex apps). At the same time I upgraded the RAM. Hope this could be stable for a while.

Michael Shi さんによる2013年12月3日

コメントを追加

投稿日: 2013年12月2日

オプション

First I would wait on adding or changing anything on your system hardware wise (hold off on adding the RAM).

See if the problem shows up on an external monitor (when you see the problem on the iMac screen). If it does then your Graphics card is having problems. If it is only on the iMac screen then check the displays signal cable & connector as it's having issues or the display its self is going.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

1件のコメント:

I'm also considering to check an external monitor first. But given that I don't have any cable with me, it might take time to test. Anyway I'll try it. Thanks for the advice!

Michael Shi さんによる2013年12月2日

コメントを追加

iMac Intel 24インチ EMC 2267

Display issue (with flicker) after installing SSD

1 件の回答

回答を追加する