Reuse the flat LCD panel to a vga monitor

Pere Castanyer, yes it can be done. You will need a couple of pieces for this kind of conversion. first you will need to know what panel you have and to get a datasheet on that This is to determine to pinout for the connectors. Then you will need a driver board, this will allow your panel to receive and display data, as well as turning the backlight on etc, You may want to look into something like thisor this one.Again, a lot of this will depend on your panel, and how comfortable you are working on it. If you provide us with the last three digits of your computer, we might find some more information on this project of yours. Hope this helps, good luck.

このアンサーは役に立ちましたか？

はいいいえ

スコア 4

17 件のコメント:

Thanks oldturkey03.

My model is A1280 and my Serial number is: ********1AQ

(You don't need all number?)

Another question is: I've not disassembled the LCD Panel from it's apple metal case,only I've dissassembled it from the unibody carcass. It's needed?

Regards.

Pere Castanyer さんによる2013年11月13日

ntro Date: October 14, 2008 Disc Date: June 8, 2009

Order No: MB466LL/A Model No: A1278 (EMC 2254)

Subfamily: Late 2008 Aluminum Model ID: MacBook5,1

Std RAM: 2 GB Std VRAM: 256 MB

Std Storage: 160 GB (5400 RPM) Std Optical: 8X DL "SuperDrive"

oldturkey03 さんによる2013年11月13日

Do you have any number you can see on the panel itself? It is most likely a LP133WX3 but you have to make sure.

oldturkey03 さんによる2013年11月13日

No way :( I've tried to separate the glass from the metal case following the instructinons of MacBook Unibody Model A1278 LCD Panel Replacement with no luck. I've heated the crystal but I'm not able to separate the damm thing.

Any other way to know the LCDpart number? because the thought of a hammer is crossing my mind.... (joking)

I supose that I need more heat...I'll keep trying.

Regards and thanks.

Pere Castanyer さんによる2013年11月14日

@oldturkey03 Assuming that I can't take of the panel from its protector crystal , In your opinion what percentatge of possibilities of error I will get if I buy this kit?:

http://www.ebay.com/itm/LVDS-VGA-LCD-scr...

Regards

Pere Castanyer さんによる2013年11月14日

12件以上のコメントを表示

コメントを追加

Thanks oldturkey03.

My model is A1280 and my Serial number is: ********1AQ

(You don't need all number?)

Another question is: I've not disassembled the LCD Panel from it's apple metal case,only I've dissassembled it from the unibody carcass. It's needed?

Regards. — Pere Castanyer
ntro Date: October 14, 2008 Disc Date: June 8, 2009

Order No: MB466LL/A Model No: A1278 (EMC 2254)

Subfamily: Late 2008 Aluminum Model ID: MacBook5,1

Std RAM: 2 GB Std VRAM: 256 MB

Std Storage: 160 GB (5400 RPM) Std Optical: 8X DL "SuperDrive" — oldturkey03
Do you have any number you can see on the panel itself? It is most likely a LP133WX3 but you have to make sure. — oldturkey03
No way :( I've tried to separate the glass from the metal case following the instructinons of MacBook Unibody Model A1278 LCD Panel Replacement with no luck. I've heated the crystal but I'm not able to separate the damm thing.

Any other way to know the LCDpart number? because the thought of a hammer is crossing my mind.... (joking)

I supose that I need more heat...I'll keep trying.

Regards and thanks. — Pere Castanyer
@oldturkey03 Assuming that I can't take of the panel from its protector crystal , In your opinion what percentatge of possibilities of error I will get if I buy this kit?:

http://www.ebay.com/itm/LVDS-VGA-LCD-scr...

Regards — Pere Castanyer

Mahmud Kabir @mahmudkabir 評価: 1 · Answer 1 · 2019-11-12T00:24:46-07:00

Mahmud Kabir @mahmudkabir

評価: 1

投稿日: 2019年11月12日

オプション

What was the result !!!???

このアンサーは役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

MacBook Unibody Model A1278

Reuse the flat LCD panel to a vga monitor

2件の回答

回答を追加する