修理を始めるには コミュニティ ストア

iPhoneの5代目となるiPhone 4S。このデバイスの修理は比較的簡単で、スクリュードライバー、開口ツールと忍耐が必要です。GSM/CDMA / 16, 32, 64 GB / 白と黒

2193回答 すべてを表示

オプション

No Signal After Screen Change

I have changed my screen on my 4S, done everything perfectly, looks awesome.

But i have a signal problem, get no signal at all on any networks, apart from Three becuase i have a Three signal booster in my home.

I get full bars on Three so there no problem with it being blocked or anything, just no signal on any other network, working sim cards.

The blue coil is not damaged, the metal prong on the battery clip is present.

I dont know if it worked before as i got this phone damaged with a broken screen so couldn't test it before i took it apart.

The WiFi has bery good signal, as does bluetooth.

Any ideas?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア -1
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順

オプション

Make sure the 4 metal tabs of the speaker assembly are down behind midframe plate correctly. Make sure the antenna screw hole (right side) on the speaker assembly is present. Make sure this right lower screw is solidly in place. Make sure the antenna wire connector is down perfectly in place on the logic board.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

1件のコメント:

All of the above are in place, just also discovered that when it's charging the battery terminal connector gets very hot, almost untouchable. Although it remains to charge, it gets hot and when it's not chrging it goes flat in about 30 mins.

Must be a short somewhere, what am i looking for?

さんによる

コメントを追加

回答を追加する

Info Info さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 233