Help to identify burned capacitor on mainboard

Question

MacBook Pro 13インチ Unibody Late 2011

2011年後期モデル番号A1278 / 2.4 GHz i5 or 2.8 GHz i7 プロセッサー

591回答すべてを表示

Stokholm @stokholm34100

評価: 23

2

投稿日: 2013年8月27日

オプション

Help to identify burned capacitor on mainboard

Hello

Looking at my father-in-Laws MacBook Pro unibody A1278 unibody. He accidently spilled cofee onto the keyboard.

The computer seems to run just fine now 1 month later, however the backlit on the keyboard is gone and many keys on the keyboard are not working correctly.

It is a 820-2936b board.

On the mainboard a single capacitor is burned, can you help me to identify it please:

I managed to find this picture showing the capacitor in your guides, but cannot read the text:

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 1

1件のコメント

Stokholm - That component is a SMD Capacitor not an IC.

Dan さんによる2013年8月27日

コメントを追加

1 件の回答

ベストアンサー

oldturkey03 @oldturkey03

評価: 781.5千

1.1千

893

2.3千

投稿日: 2013年8月27日

オプション

Stokholm, that is reference designator C6603 and is a 100UF 20% 6.3V TANT capacitor. The case is a A L1 and something like this or on here should work. the capacitor is not part of your keyboard backlight, but of the Speaker Amp circuit. Hope this helps, good luck.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

6 件のコメント:

Thank you very much for the detailed answer.

I will get the keyboard and capacitor replaced, thanks to you it is possible to install the correct one.

Stokholm さんによる2013年8月27日

Can I use a size B (3528) with the same specs instead of the size A (3216) - there is enough space on the board.

Stokholm さんによる2013年8月28日

It might be possible, but make sure that the cap will meet the solder pads on the board. If it does, you can most certainly use it. Thank you for accepting my answer and best of luck to you.

oldturkey03 さんによる2013年8月28日

I received a new keyboard and backlight, it all work very well now. I haven't replaced the cap yet, as I am still waiting for it to be delivered. Can it be dangerous to use it with the burned cap?

Stokholm さんによる2013年9月10日

Since it is already burned out your circuit already has failed, so that is no longer a danger. I would however replace it as soon as you can:-)

oldturkey03 さんによる2013年9月10日

1以上のコメントを表示

コメントを追加

Thank you very much for the detailed answer.

I will get the keyboard and capacitor replaced, thanks to you it is possible to install the correct one. — Stokholm
Can I use a size B (3528) with the same specs instead of the size A (3216) - there is enough space on the board. — Stokholm
It might be possible, but make sure that the cap will meet the solder pads on the board. If it does, you can most certainly use it. Thank you for accepting my answer and best of luck to you. — oldturkey03
I received a new keyboard and backlight, it all work very well now. I haven't replaced the cap yet, as I am still waiting for it to be delivered. Can it be dangerous to use it with the burned cap? — Stokholm
Since it is already burned out your circuit already has failed, so that is no longer a danger. I would however replace it as soon as you can:-) — oldturkey03

MacBook Pro 13インチ Unibody Late 2011

Help to identify burned capacitor on mainboard

1 件の回答

回答を追加する