Damaged LVDS Socket, lost pins. Maybe Panel @ DisplayPort?

The connectors referenced by Christoph could fit your needs - but be aware that it is pretty easy to burn the solder coating with a normal solder station. Use a 5 watts type like you would be using for SMD type boards and soldering.

Of course you could solder the wires of the LVDS cable directly to the board, but that would not be easy to do.

Regards, Stone

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

1件のコメント:

Hi Christoph

That would be the right guy to do the repair ;-)

I am not sure about the thing shown in your second picture. It looks like a connector, too. What seems to be broken is the isolation - so it comes to the plug if this will dangerous or not (if the plug is fully covered it should not be a problem).

But I have to say, I am not that familiar with iMacs (cause I do not have one nor had) - can you please tell me what is normally connected to it or do a picture of the whole board just marking the connector?

Thanks, Stone

Stone さんによる2013年8月22日

コメントを追加

maybe this will work?:

http://www.ebay.com/itm/NEW-I-PEX-LCD-LE... — Christoph
Hi Christoph

That would be the right guy to do the repair ;-)

I am not sure about the thing shown in your second picture. It looks like a connector, too. What seems to be broken is the isolation - so it comes to the plug if this will dangerous or not (if the plug is fully covered it should not be a problem).

But I have to say, I am not that familiar with iMacs (cause I do not have one nor had) - can you please tell me what is normally connected to it or do a picture of the whole board just marking the connector?

Thanks, Stone — Stone

iMac Intel 27インチ EMC 2390

Damaged LVDS Socket, lost pins. Maybe Panel @ DisplayPort?

Update

1 件の回答

回答を追加する