メインコンテンツにスキップ

2012年9月12日に発表されたApple社による6番目となる iPhone。このデバイスの修理方法は前モデルと類似しており、スクリュードライバーと開封工具が必要です。GSMかCDMA方式、16/32/64 GB。 本体色は黒と白。

2521回答 すべてを表示

Dropped my iPhone, digitizer replaced but still not working?

Hi everyone

I dropped my iPhone 5 and the LCD / Digitizer both got broken.

I replaced them with a new part from eBay and the LCD works and all functions on the phone work (that I can see) but the digitizer does not recognize touch.

I have tested the digitizer on another iPhone 5 and it works perfectly.

I restored the iPhone and it still will not work.

Does anyone have any ideas? I assume it is hardware damage? The digitizer connector on the logic board looks fine and I cannot see any other problems. The phone has also never been water damaged.

Thanks, Ryan.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア -1
3 件のコメント

Hi I have the iphone-5s - two different companies have replaced screen and digitizer - neither company could solve the problem - after replacement display works but it will not allow you to input the passcode - ie it doesnt recognise the finger touch ... any ideas

thanks Gray

さんによる

Servis destroy your home button touchID reader - since is unicate for each phone , replacement does not read fingerprints and there is no way to repair

さんによる

I have similar problem. My iPhone was water damaged, and after that everything works, but touchscreen isn't responsive.

Does anyone knows what can cause this?

Znas li ti Milose?

さんによる

コメントを追加

3件の回答

ベストアンサー

The Tech Genie, check on here step 18 will show you the location.

Block Image

Orange = Texas Instruments 27C245I touch screen SoC

Yellow = Broadcom BCM5976 touchscreen controller

Rather than a single touchscreen controller, Apple went with a multi-chip solution to handle the larger screen size." Hope this helps, good luck.

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

Look very closely at the pin connections on the logic board sound like the one that plugs into the digitiser got damaged

このアンサーは役に立ちましたか?

スコア 0

2 件のコメント:

Thanks for the suggestion. I checked the connection on the board and it looked perfect to the eye, even under a magnifying glass.

Is there a certain part of the board that deals with the digitizer on the iPhone 5?

さんによる

Have You ever found the solution for this issue?

Kind regards.

さんによる

コメントを追加

I'm having the same problem. Been trying to fix this 5c since forever. I've got the screen replaced, got it check out, iphone Techs. couldn't fix it. I'm more thane sure our problem would be solved if we all bought new logic boards, but they are crazy expensive.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

The Tech Genie さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 11,618