評価: 1
1
when you turn it on the tray that the laser lens sits on keeps loading forward past its stopping point. it keeps clicking and won't stop loading forward therfore it wont load any games. any suggestions on what it could be and if so will it be fairly easy to fix? the playstation i have is the new one not the old big ones but one of the real thin ones. please help thank you!
この質問は役に立ちましたか？
評価: 439
3
1
2
Your system is a PSTwo, not a PS2.
Check to see if the sensor on the PSTwo laser is broken off, or stuck down or up. It's a tiny black nub on the surface of the laser closest to the transport (disc spinning motor). It's supposed to freely push in and pop back out. It's easy to make it stuck if a sticky liquid gets in there.
Good Luck.
このアンサーは役に立ちましたか？
it seems good with mine, yet the issue remains
I had this issue and was able to fix it. I had to take apart the spindle assembly and resolder the sensor button. The solder was very dull so my only guess is it wasn’t making good contact with the board.
過去 24時間: 0
過去 7 日: 4
過去 30 日: 19
今までの合計 4,617
