MacBook does not work on AC power

Question

MacBook Core 2 Duo

1.83、2.0、2.1、 2.16、2.2、または2.4 GHzのいずれかのCore 2 Duoプロセッサーを搭載したModel A1181

1203回答すべてを表示

MacRuud @macruud95339

評価: 35

3

1

投稿日: 2010年4月12日

オプション

MacBook does not work on AC power

MacBook stopped charging the battery and will not work with AC power adapter only.

MacBook notices the connected power adapter, but reports battery not charging. Adapter light stays green even when battery needs recharging. MacBook runs fine on battery power. Installed battery update 1.4. Checked the battery (Cycles 66, Condition: good; does charge on onther MacBook). Checked the AC adapter (works fine on other MacBook).

Logic board failure?

Any other thoughts?

got no applecare for this MacBook.

read somewhere a faulty connector could be covered by legal product warranty (production fault)

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 1

コメントを追加

3件の回答

ベストアンサー

rj713 @rj713

評価: 78.2千

384

96

162

投稿日: 2010年4月12日

オプション

Since it works with the battery and not the adapter probably the magsafe board is bad. I'm including the url's for the repair and the part. Ralph

MacBook Core 2 Duo Magsafe Board Replacement

MacBook MagSafe DC-In Board

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

1件のコメント:

Agreed. + I would also try using some contact cleaner on any corroded surface.

mayer さんによる2010年4月12日

コメントを追加

Agreed. + I would also try using some contact cleaner on any corroded surface. — mayer

Jethro @jethro18718 評価: 217 6 1 · Answer 1 · 2010-04-12T17:06:33-07:00

最も参考になった回答

Jethro @jethro18718

評価: 217

6

1

投稿日: 2010年4月12日

オプション

Power flows from the AC adapter, to the DC-in board, through the logic board and battery connector, then finally to the battery. There obviously isn't anything wrong with the battery or the AC adapter because they work on a known good machine. Therefore, it is something internal.

I would suggest opening the computer and checking the battery connector first. There have been a quite a few computers I have worked on and there was some corrosion in between the battery connector and the logic board. If there is then you need to replace the logic board and then battery connector.

Hopefully there isn't any corrosion and you can just replace the DC-in board.

Goodluck!

製品

MacBook MagSafe DC-In Board

$19.99

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

コメントを追加

MacRuud @macruud95339 評価: 35 3 1 · Answer 2 · 2010-04-13T13:28:38-07:00

MacRuud @macruud95339

評価: 35

3

1

投稿日: 2010年4月13日

オプション

follow up:

re Jethro:

- is the DC-in board (only) a connector, or does it contain electronics ?

- visual inspection of the battery connector shows no corrosion.

re Ralph:

- if the DC-in board is a connector only, I find it hard to believe this can malfunction.

- if so, can a claim for repair be covered by an (extended) applecare warranty ?

MacRuud

このアンサーは役に立ちましたか？

はいいいえ

スコア 0

1件のコメント:

If you still have AppleCare and it hasn't gotten wet, take it in. Come back here after the warranty has expired.

mayer さんによる2010年4月13日

コメントを追加

MacBook Core 2 Duo

MacBook does not work on AC power

Update

3件の回答

MacBook MagSafe DC-In Board

回答を追加する