Help, Spilled non-alcoholic beer on my late 2010 MacBook air 13"?

Use the tags on the right to find Answers that can prepare you for your project. At this point you have little to lose by trying any thing up to and including completely removing the logic board and trying to clean it.

You may be lucky by examining the board for corrosion or burn marks. You might only have to remove and clean some contacts/connectors (use a soft bristle brush and dielectric contact cleaner - give it plenty of time to dry (days not minutes or hours) worst case scenario is you need to replace the logic board.

If this Answer is helpful please remember to return and mark it Accepted.