Replaced battery on iPod Classic, Turns on but doesn't charge or sync

Rack, "couldnt pass the USB_Detect test." check the dock connector on your iPod. make sure there are no bend, broken or corroded pins. Also, try a different cable. The other issue with this model is the battery connector on the logic board. It does have a tendency of disconnecting from the board and eventually to break off. Hope this helps, good luck.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

2 件のコメント:

Thanks for the suggestion,

The cable is good, it works fine with my iPhone.

I see some discolor in the pins.

Is it easier to replace the dock connector port by myself, I don't really find self install-steps on the internet.

Rack さんによる2013年3月27日

No, it is a royal pain. It requires fine soldering of 30 contacts plus two anchors. Then it is also a chore to find a replacement (I harvested from an old board) and to resolder it. It takes patience, the right tools and practice.

oldturkey03 さんによる2013年3月27日

コメントを追加

Thanks for the suggestion,

The cable is good, it works fine with my iPhone.

I see some discolor in the pins.

Is it easier to replace the dock connector port by myself, I don't really find self install-steps on the internet. — Rack
No, it is a royal pain. It requires fine soldering of 30 contacts plus two anchors. Then it is also a chore to find a replacement (I harvested from an old board) and to resolder it. It takes patience, the right tools and practice. — oldturkey03