メインコンテンツにスキップ

より早い処理スピードを可能にしたiPhone 3Gのアップグレード版です。このデバイスの修理は3Gと似ており、標準のドライバーと開口ツールが必要です。モデル番号 A1303 / 16 もしくは 32 GBの容量 / ブラックもしくはプラスチックの背面ケース

1500回答 すべてを表示
締切られた回答

Black screen with stripes after replacing front panel.

I followed the guide to replacing the front pannel. Once I finished, i realize that the phone was probably turned on. After that, I have tried to hard reset it, but it didn't work. Sometimes the screen goes black with vertical gray stripes, sometimes not. What means that? Could be the fact that the phone was turned on when I was working on it a possible reason?

Many tanks.

Nico

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

3件の回答

最も参考になった回答

If the phone was on when you disconnected the battery there is a chance something may have happened...but for it to be doing what you have described is strange. Have you tried re setting the connecting ribbons (with the phone turned off)? If that doesn't work it may just be the screen that may be faulty.

このアンサーは役に立ちましたか?

スコア 1

2 件のコメント:

I haven't tried to re set the connecting ribbons with the phone turned off. I should try it. Anyway, the screen was the older screen of the phone. Is there a chance to damange it while phone is turned on?

さんによる

...and how can i turn of the phone if the touch and the screen doesn't work?

さんによる

コメントを追加

It involves a little more work, but you could also try lifting the logic board off from the battery just enough to let the phone reset everything. Then putting the phone back together and turing it on with the display in.

このアンサーは役に立ちましたか?

スコア 1

7 件のコメント:

I've already done it.

さんによる

How did it go?

さんによる

Nothing changed.

さんによる

Try a new screen... I have a feeling that its a faulty screen.

さんによる

Maybe the screen is faulty, but the phone is turned on right now. How can I turn it off?

さんによる

2件以上のコメントを表示

コメントを追加

Check the flex cable.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 428