メインコンテンツにスキップ

iPhoneの第2世代モデル。モデル番号はA1241 / 8 もしくは16 GBの容量/ ブラックもしくはホワイトのプラスチック製背面ケース。修理はオリジナルiPhoneに比べて直接パーツに作業ができます。ドライバー、こじ開けるためのツールと吸盤カップが必要です。

1158回答 すべてを表示

iPhone Body Won't Snap Fully Together

My standby/power switch on the iPhone has not been working the last several days and I finally figured out why. The front and rear of the iPhone do not fully snap together in the top right hand corner. I can push them together and they will stay together for a few second and the button begins working but then they come back apart. The gap is almost unnoticeable but even when I left it pulled together overnight it still wouldn't stay together in the morning.

Any suggestions would be appreciated.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

1 件の回答

ベストアンサー

Perhaps something very small (as in a grain of sand) is stuck inside preventing full closure. I would suggest you open it up using a guide like this one to get inside, and check that nothing's there, and then reassemble it carefully, making sure everything lines up and is flush.

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

回答を追加する

jws43yale さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,707