修理を始めるには コミュニティ ストア

iPhoneの第4代目で、修理はそのままパーツを直接交換するだけです。しかし、正面ガラスとLCDはセットで交換する必要があります。容量はGSM / 8,、16m32 GB / モデル番号 A1332 /本体カラーは黒と白色

2375回答 すべてを表示

オプション

Camera Shutter Wont open.

Hi

Hopefully someone can help im at my wits end!

did a repair today to an iphone 4 front glass assembly (first repair) it went fine and everything seems to be working apart from the camera.

i can open the app but the shutter just wont open, anytime it has (maybe twice maximum) it has just shown black.

i know its possbile you can knock on off the jumpers off during assembly on the mother board but ive checked and judging by other photos its still there (although its that small its hard to tell)

ive re-booted the phone several times, stripped and cleaned the connections and also reset the phone but nothing has worked.

can anyone give some advise?

Thanks

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア -1
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

Here is my first step, re-check your work. For the Camera (back camera) to work the Front Facetime Camera must work. So pop up the Front Camera Flex and then carefully and perfectly reconnect it to the Logic Board. Do the same for the Back Camera Flex. Put the iPhone back together. See if it helped. If still problem, you may have damaged a Logic Board capacitor, these can be difficult to ferret out. The Back Camera may be faulty and need to be replaced, or the Front Camera may be faulty and need to be replaced. I would start with making sure the Flex Cables are securely in place.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

1件のコメント:

hi thanks for your help.

there was never any certainty the phone would ever work when i got it, neither camera works.....and further to this the backlight now wont stay on for more than a fraction of a second when unlocking the phone, i think the phones maybe screwed.

さんによる

コメントを追加

オプション

Best thing I would Recommend is to test the parts on a working iPhone. I personally have one that is mostly taken apart to test functionality. If anything you could try to put the device into DFU mode and restore the device that way to make sure it was restored properly. Mainly sounds like your having firmware issues if the backlight and camera(if tested in working condition) are not corresponding to proper factory functionality.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

1件のコメント:

Ill give this a go thanks, to be honest its likely goosed.

ill try it in dfu mode if this doesnt sort the its likely spares or repairs...thanks again though

さんによる

コメントを追加

回答を追加する

David Gillespie さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 5,775