メインコンテンツにスキップ

iPhoneの第4代目で、修理はそのままパーツを直接交換するだけです。しかし、正面ガラスとLCDはセットで交換する必要があります。容量はGSM / 8,、16m32 GB / モデル番号 A1332 /本体カラーは黒と白色

2375回答 すべてを表示

Charging is not supported with this accessory

My iphone 4 started giving me this error message. Following the instructions given in other questions, I started by cleaning dock. I then replaced battery, no difference. I then replaced dock connector, still same error message. I don't know what to do next.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

2件の回答

最も参考になった回答

DANETERRELL3the usual way to dela with that is by

1.try other USB cable,or charger.

2.Replace dock flex connector.

3.Reball/Replace PMIC.

Anything after that could be turning into a board level repair, due to failed SMD components, like the diodes. Hope this helps, good luck.

このアンサーは役に立ちましたか?

スコア 1

2 件のコメント:

Can't seem to find guides on dock flex connector or PMIC. Starting to wonder if not better off replacing phone?

さんによる

PMIC=Power Management IC

dock flex connector= the cable on your dock connector. Check the connector on the board. Are you pretty handy with a multimeter and a soldering station?

さんによる

コメントを追加

I am having problems with my iphone as well. It kkeeps saying charging is not supported with this device. I have tried restoring it and a lot of other methods online. I also read that it could be the dock connector. I was just wondering if anyone knew any other methods to make this go away before i buy a new dock connector. Any input would be greatly appreciated thanks sandy.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

DANETERRELL3 さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 7,982