メインコンテンツにスキップ

2012年6月発売。Core i7プロセッサ 、Turbo Boost / 最大1 GB DDR5 Video RAM

596回答 すべてを表示
締切られた回答

I tried to add 16gb to MBP mid 2012 (non retina)

When trying to upgrade to 16gb MBP the result was disastrous. The system would become frozen on a scrambled (and flashing, not artifacts) screen with part of the window and part of the desktop intermixed. Since going back to the 8gb of the same manufacturer memory (corsair) I haven't had any problems. Is there something I can do to check the memory? In the "about this mac" window the 16gb was shown and listed as "ok"

Any ideas what could be the problem?

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

I don't have any idea, but you may check your RAM installation and try to reinstall both memory modules again. I have added 16GB RAM into my MBP 13" 2012 only few days ago and everything is working flawless. I used Crucial dual-voltage chips. Your RAM should be PC3-12800 (1600MHz) supporting 1.35V power. Check if your modules meets this specification.

このアンサーは役に立ちましたか?

スコア 1

2 件のコメント:

Now I see.. The voltage is of the memory is 1.5v rather than 1.35v.... Even though everything else is the same apparently that voltage different is causing the problems.

さんによる

That low power memory modules are called DDR3L so check for these :-)

さんによる

コメントを追加
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 2,709