メインコンテンツにスキップ

iPhoneの第4代目で、修理はそのままパーツを直接交換するだけです。しかし、正面ガラスとLCDはセットで交換する必要があります。容量はGSM / 8,、16m32 GB / モデル番号 A1332 /本体カラーは黒と白色

2375回答 すべてを表示
締切られた回答

Replica power button not making good contact

Hi,

I am trying to replace the metal power button on an iPhone 4, but upon installation the power button is not making good contact with the power flex. I have compared the original button and the replacement and there is a slight difference.

This pic shows what an original one looks like:

http://www.lunacommerce.com/2011-7012-th...

and a replacement looks like this:

http://www.case-parts.com/uploads/detail...

so you can see the first has some sort of spacer.

Now I tried to remove the spacer of the original with out luck please can someone advise me how to go about installing this new button.

(I also have similar problem with the volume button)

Thanks

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

You need to ad the spacer behind the new button....to make a little bump....or you can drop a little crazy glue to make a bump behind the new button....

このアンサーは役に立ちましたか?

スコア 1

1件のコメント:

Hi, Thanks. I finally removed the little bump, it looked like it was part of the power button. I simply used a hair dryer to heat the bump up and the with a flat head screw driver popped it of. Once again thanks.

さんによる

コメントを追加
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 479