メインコンテンツにスキップ

2012年3月16日に発売されたiPad Wi-Fi機能搭載の第3世代モデルです。モデル番号はA1416です。修理には温めて、慎重にこじ開ける作業が必須です。

182の回答 すべて表示

iPad Digitizer Replacement and Repair Problem

Hello

I am repairing an iPad 3 digitizer.

After removing the broken digitizer, I was testing the new parts and all was well at that time.

Don't ask me how, but I almost dropped the unit during this testing phase. No adhesive was applied, and it basically fell into the three pieces while turned on.

The LCD display cable came unplugged while the unit was powered on.

At this point, the device does not display anything at all now.

How do I determine if it is the display or the logic board that has failed?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

iPhoneのバッテリーキット

Only $29.99

Buy Now

iPhoneのバッテリーキット

Only $29.99

Buy Now

1回答

最も参考になった回答

Hey Vince,

After you plug or unplug the LCD while your iPAd is on you need to perform hard reset by holding power and home button down until you see apple logo appear on the screen.

Of course this will only work if you did not damage any of the flex cables or connectors.

Hope this will help.

この回答は役に立ちましたか?

スコア 2

コメント:

John

I had tried the hard reset first, but after reading your post, I went back and tried it once more.

The device powered on and is functioning.

Kudos.

による

コメントを追加

回答を追加する

Vince さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 3,530