メインコンテンツにスキップ

Model A1174 with 2 GHz Core Duo or Model A1207 with 2.16 or 2.33 GHz Core 2 Duo

277の回答 すべてを表示

upgraded CPU and now no power

So I took the plunge and upgraded the CPU from 2.0Ghz core duo to 2.16ghz core 2 duo. Now I have no power and all that happens when I hit the power button is the light blinks once, shuts off and nothing happens. I have reseated the memory many time and I have even completely taken it apart and tried a second CPU of the same specs and still get the same issues.

Does anyone have a clue what could be the issue?

My last resort would be to take it apart again and put the old CPU back in to see if it boots and I didn't fry the board at some point.

I was really careful and even cleaned every thing out with a compressor because the thing was disgusting with dust build up.

Any help before I take a 3rd plunge would be appreciated.

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 0

コメント:

So I may have figured out my problem. I am using a t5850 processor 2.16ghz. It fits in the socket with no issues but it may not be compatible.

Can someone please confirm this that may have tried the upgrade?

thanks again,

による

コメントを追加

2回答

選択されたソリューション

AFAIK you have to "upgrade" to a CPU used or "offered" by Apple... the EFI firmware won't support anything else. See Can you replace the i5 processor with an i7?.

If this answer was helpful please remember to return and mark it Accepted.

この回答は役に立ちましたか?

スコア 0

コメント:

This didn't really help but thanks for trying.

による

コメントを追加
最も参考になった回答

Run through my answer here and see if it helps: Core Duo CPU upgrade to Core 2 Duo CPU?

この回答は役に立ちましたか?

スコア 1
コメントを追加

回答を追加する

sold4money さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 701