メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: Anwar Shiekh ,

テキスト:

Radio ShackRadio-Shack have a very nice soldering iron with a hole in the tip,tip; I found this makes working on the taskG5 iMac board much easiereasier, as it heats all round the lead.

http://www.radioshack.com/product/index.jsp?productId=2062731

I recently re-capped a G5 iMac board, and it went very smoothly thanks to this $12 iron.

Replacing the capacitors can be done without having to clear the holes, by cutting the leads short so they can be pushed in with a little pressure as one heats from the other side
.
Radio ShackRadio-Shack have a very nice soldering iron with a hole in the tip,tip; I found this makes working on the taskG5 iMac board much easiereasier, as it heats all round the lead.

http://www.radioshack.com/product/index.jsp?productId=2062731

I recently re-capped a G5 iMac board, and it went very smoothly thanks to this $12 iron.

Replacing the capacitors can be done without having to clear the holes, by cutting the leads short so they can be pushed in with a little pressure as one heats from the other side
.

ステータス:

open

オリジナル投稿者: Anwar Shiekh ,

テキスト:

Radio Shack have a nice soldering iron with a hole in the tip, this makes the task much easier.

ステータス:

open