Skip to main content
ヘルプ

現在のバージョン作成者: Sam Lionheart ,

タイトル:

What logic board component is this?

テキスト:

I am currently trying to resurrect a relatively expensive hair straightener. It is a Croc Infrared Titanium Ceramic 1.5-inch Flat Iron. Upon disassembly of the logic board, I did find an obvious burned out component. It does look like a resistor, but does not quite fit the pattern. It is 9.6mm in length, which would make it 1/2 watt. The part that does not look like a resistor are the ring markings. From what is left it looks like:
 
Black
 
Grey
 
third ring not clearly identifiable due to damage
 
Black
 
In the normal resistor world, the third ring would be the multiplier, the fourth the tolerance. Black is not an option for that. So anybody have an idea what I got here? Anybody have a flat iron apart to let me know what component I am looking at? I did try to find any schematic or diagram without success. Thanks for the help.
 
'''UPDATE'''
 
Any chance this could be a capacitor? I do know that some of them use ring markings as well.
 
'''Update''' Hope this is a better picture.
 
[image|147817image|147817|align=left]
[image|147817image|147817|align=left]

デバイス:

Croc Infrared Titanium Ceramic 1.5-inch FlatFlat Iron
Croc Infrared Titanium Ceramic 1.5-inch FlatFlat Iron

ステータス:

open

承認済み回答:

78836

編集者: oldturkey03 (投票の詳細) ,

タイトル:

What logic board component is this?

テキスト:

I am currently trying to resurrect a relatively expensive hair straightener. It is a Croc Infrared Titanium Ceramic 1.5-inch Flat Iron. Upon disassembly of the logic board, I did find an obvious burned out component. It does look like a resistor, but does not quite fit the pattern. It is 9.6mm in length, which would make it 1/2 watt. The part that does not look like a resistor are the ring markings. From what is left it looks like:
 
Black
 
Grey
 
third ring not clearly identifiable due to damage
 
Black
 
In the normal resistor world, the third ring would be the multiplier, the fourth the tolerance. Black is not an option for that. So anybody have an idea what I got here? Anybody have a flat iron apart to let me know what component I am looking at? I did try to find any schematic or diagram without success. Thanks for the help.
 
'''UPDATE'''
 
Any chance this could be a capacitor? I do know that some of them use ring markings as well.
 
'''Update''' Hope this is a better picture.
 
[image|147817]

デバイス:

Croc Infrared Titanium Ceramic 1.5-inch Flat Iron

ステータス:

open

承認済み回答:

78836

編集者: oldturkey03 ,

タイトル:

What logic board component is this?

テキスト:

I am currently trying to resurrect a relatively expensive hair straightener. It is a Croc Infrared Titanium Ceramic 1.5-inch Flat Iron. Upon disassembly of the logic board, I did find an obvious burned out component. It does look like a resistor, but does not quite fit the pattern. It is 9.6mm in length, which would make it 1/2 watt. The part that does not look like a resistor are the ring markings. From what is left it looks like:
 
Black
 
Grey
 
third ring not clearly identifiable due to damage
 
Black
 
In the normal resistor world, the third ring would be the multiplier, the fourth the tolerance. Black is not an option for that. So anybody have an idea what I got here? Anybody have a flat iron apart to let me know what component I am looking at? I did try to find any schematic or diagram without success. Thanks for the help.
 
'''UPDATE'''
 
Any chance this could be a capacitor? I do know that some of them use ring markings as well.
'''Update''' Hope this is a better picture.
 
[image|147440image|147817]
[image|147440image|147817]

デバイス:

Croc Infrared Titanium Ceramic 1.5-inch Flat Iron

ステータス:

open

編集者: oldturkey03 ,

タイトル:

What logic board component is this?

テキスト:

I am currently trying to resurrect a relatively expensive hair straightener. It is a Croc Infrared Titanium Ceramic 1.5-inch Flat Iron. Upon disassembly of the logic board, I did find an obvious burned out component. It does look like a resistor, but does not quite fit the pattern. It is 9.6mm in length, which would make it 1/2 watt. The part that does not look like a resistor are the ring markings. From what is left it looks like:
 
Black
 
Grey
 
third ring not clearly identifiable due to damage
 
Black
 
In the normal resistor world, the third ring would be the multiplier, the fourth the tolerance. Black is not an option for that. So anybody have an idea what I got here? Anybody have a flat iron apart to let me know what component I am looking at? I did try to find any schematic or diagram without success. Thanks for the help.
'''UPDATE'''
Any chance this could be a capacitor? I do know that some of them use ring markings as well.
 
[image|147440]

デバイス:

Croc Infrared Titanium Ceramic 1.5-inch Flat Iron

ステータス:

open

編集者: oldturkey03 ,

タイトル:

What logic board component is this?

テキスト:

I am currently trying to resurrect a relatively expensive hair straightener. It is a Croc Infrared Titanium Ceramic 1.5-inch Flat Iron. Upon disassembly of the logic board, I did find an obvious burned out component. It does look like a resistor, but does not quite fit the pattern. It is 9.6mm in length, which would make it 1/2 watt. The part that does not look like a resistor are the ring markings. From what is left it looks like:
 
Black
 
Grey
 
third ring not clearly identifiable due to damage
 
Black
 
In the normal resistor world, the third ring would be the multiplier, the fourth the tolerance. Black is not an option for that. So anybody have an idea what I got here? Anybody have a flat iron apart to let me know what component I am looking at? I did try to find any schematic or diagram without success. Thanks for the help.
 
[image|147440]

デバイス:

Croc Infrared Titanium Ceramic 1.5-inch Flat Iron

ステータス:

open

オリジナル投稿者: oldturkey03 ,

タイトル:

What logic board component is this?

テキスト:

I am currently trying to resurrect a relatively expensive hair straightener. It is a Croc Infrared Titanium Ceramic 1.5-inch Flat Iron. Upon disassembly of the logic board, I did find an obvious burned out component. It does look like a resistor, but does not quite fit the pattern. It is 9.6mm in length, which would make it 1/2 watt. The part that does not look like a resistor are the ring markings. From what is left it looks like:

Black

Grey

third ring not clearly identifiable due to damage

Black

In the normal resistor world, the third ring would be the multiplier, the fourth the tolerance. Black is not an option for that. So anybody have an idea what I got here? Anybody have a flat iron apart to let me know what component I am looking at? I did try to find any schematic or diagram without success.   Thanks for the help.

デバイス:

Croc Infrared Titanium Ceramic 1.5-inch Flat Iron

ステータス:

open