Skip to main content
ヘルプ

オリジナル投稿者: oldturkey03 ,

テキスト:

It is a tricky repair since the connector is an SMD part. It is soldered on top of the board. This requires some special skills, but it is doable. Check [http://www.youtube.com/watch?v=1vfupcWZsxw|this video] for more insight. You can get the part from places [http://www.amazon.co.uk/Classic-Generation-Logic-Battery-Connector/dp/B005ZR3BKO|like this.] If you are not sure about your skills of getting it done, you might just want to try a TV repair shop and see if they can do it for you. If you have the part and the board out of your ipod, it should be straight forward and not to expensive. Make sure that the cost for the part and the repair do not exceed that cost for a new logic board, so I would think no more than $50 together. Hope this helps, good luck.

ステータス:

open