***Clean the paper feed rollers in the cartridge access area***
-
# Turn off the printer, and then disconnect the power cord.
-
[quote]
-
# WARNING:
-
# Disconnect the power cord before reaching inside the printer to avoid risk of injuries or electric shock.
-
[/quote]
+
# Turn off the printer, and then disconnect the power cord before reaching inside the printer to avoid risk of injuries or electric shock.
# Disconnect the USB or Ethernet cable from the rear of the printer, if you have a cable connection to the printer.
# Place your fingers into the slot on the left side of the printer, and then pull forward to open the cartridge access door.
# Lightly dampen a lint-free swab with the water, and then squeeze any excess liquid from the swab.
# Press the swab against the rollers inside the printer, and then rotate the rollers upwards with your fingers. Apply a moderate amount of pressure to remove any dust or dirt buildup.
# Allow the rollers to dry completely (approximately 10 minutes).
# Close the cartridge access door.
# Reconnect the power cord to the rear of the printer, and then turn on the printer.
***Clean the paper feed rollers in the cartridge access area***
# Turn off the printer, and then disconnect the power cord.
-
-
[quote]# WARNING:
-
# Disconnect the power cord before reaching inside the printer to avoid risk of injuries or electric shock.[/quote]
-
+
[quote]
+
# WARNING:
+
# Disconnect the power cord before reaching inside the printer to avoid risk of injuries or electric shock.
+
[/quote]
# Disconnect the USB or Ethernet cable from the rear of the printer, if you have a cable connection to the printer.
# Place your fingers into the slot on the left side of the printer, and then pull forward to open the cartridge access door.
# Lightly dampen a lint-free swab with the water, and then squeeze any excess liquid from the swab.
# Press the swab against the rollers inside the printer, and then rotate the rollers upwards with your fingers. Apply a moderate amount of pressure to remove any dust or dirt buildup.
# Allow the rollers to dry completely (approximately 10 minutes).
# Close the cartridge access door.
# Reconnect the power cord to the rear of the printer, and then turn on the printer.
Straight from HP web site:
***Clean the paper feed rollers in the cartridge access area***
# Turn off the printer, and then disconnect the power cord.
[quote]# WARNING:
# Disconnect the power cord before reaching inside the printer to avoid risk of injuries or electric shock.[/quote]
# Disconnect the USB or Ethernet cable from the rear of the printer, if you have a cable connection to the printer.
# Place your fingers into the slot on the left side of the printer, and then pull forward to open the cartridge access door.
# Lightly dampen a lint-free swab with the water, and then squeeze any excess liquid from the swab.
# Press the swab against the rollers inside the printer, and then rotate the rollers upwards with your fingers. Apply a moderate amount of pressure to remove any dust or dirt buildup.
# Allow the rollers to dry completely (approximately 10 minutes).
# Close the cartridge access door.
# Reconnect the power cord to the rear of the printer, and then turn on the printer.