メインコンテンツにスキップ
ヘルプ

オリジナル投稿者: Benjamin Doyle ,

タイトル:

How to test the PSU with a multimeter

テキスト:

I have a late 2013 Mac Pro, it is totally dead, no illumination at all when power button is pressed. totally dead.

I want to rest the PSU with a multimeter, but I am not sure what terminals to attach my multimeter to and what readings I should expect

[image|2444988]

This image shows the terminals I am just not sure what I should be expecting (Thanks for the person who originally posted this)

I am aware of the diagnostic LEDs. however all I get when I press the test button is the 11V LED, and that LED only stays lit when the test button is depressed.

[image|2444997]

[image|2444996]

Based on this post [link|https://logi.wiki/index.php/Mac_Pro_6,1_Late_2013_Diagnostic_LEDs|https://logi.wiki/index.php/Mac_Pro_6,1_Late_2013_Diagnostic_LEDs] I was under the impression the 2nd LED down/11V LED should remain lit whenever the power lead is attached however this is not the case with me. If this is incorrect, could someone explain to me how the diagnostic lights are supposed to work please? FYI the flex error LED lights up red when the flex cable is disconnected so that appears to be working.

Any assistance would be greatly appreciated. I don’t want to splash out on a new PSU if thats not going to get me back online.  TIA

デバイス:

Mac Pro Late 2013

ステータス:

open