Skip to main content
ヘルプ

現在のバージョン作成者: oldturkey03 (投票の詳細) ,

タイトル:

Why can't I get past the gray screen?

テキスト:

Panic mode has set in!

Have done the following:
1. Disconnect, test peripheral devices and network cables. '''Made no difference.'''
2. Perform a Safe Boot. '''Would not perform a safe boot.'''
3. Reset the NVRAM/PRAM. '''Made no difference.'''
4. Start from your Mac OS X Install disc; use Disk Utility. '''Won't do it.'''
5. Check your cables and power source. '''Made no difference.'''
6. Remove third-party RAM and internal hardware. '''Made no difference.'''
7. Perform an Archive and Install installation of Mac OS X. '''Can't do it.'''
8. Perform an Erase and Install installation of Mac OS X as a last resort. '''Not willing to do that, because I really need a couple of things that are sitting on my hard drive.'''

Is there anything I can do to retrieve the information that I need from the hard drive?

デバイス:

PowerBook G4 Titanium DVI

ステータス:

open

承認済み回答:

8161

オリジナル投稿者: Cathy Burwood ,

タイトル:

Why can't I get past the gray screen?

テキスト:

Panic mode has set in!

Have done the following:
1. Disconnect, test peripheral devices and network cables. '''Made no difference.'''
2. Perform a Safe Boot. '''Would not perform a safe boot.'''
3. Reset the NVRAM/PRAM. '''Made no difference.'''
4. Start from your Mac OS X Install disc; use Disk Utility. '''Won't do it.'''
5. Check your cables and power source. '''Made no difference.'''
6. Remove third-party RAM and internal hardware. '''Made no difference.'''
7. Perform an Archive and Install installation of Mac OS X. '''Can't do it.'''
8. Perform an Erase and Install installation of Mac OS X as a last resort. '''Not willing to do that, because I really need a couple of things that are sitting on my hard drive.'''

Is there anything I can do to retrieve the information that I need from the hard drive?

デバイス:

PowerBook G4 Titanium DVI

ステータス:

open