メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

ヘルプ

オリジナル投稿者: Chris Stables ,

テキスト:

Remove the shield bracket and make sure the connector is seated properly. If you have a multimeter check the pin in red it should be 0.53 with red probe on ground, also check the corresponding pin on the flex cable, it should go to ground when the power button is pressed.

If you haven’t got a multimeter and the connectors look fine I would replace the power button flex assembly.

[image|2258131]

[image|2258133]

ステータス:

open