メインコンテンツにスキップ
ヘルプ

オリジナル投稿者: oldturkey03 ,

テキスト:

Benjamin Lee, I would recheck my work. Make sure all the connectors are properly attached. Also make sure that all hold down tabs etc. are engaged and that you do not have any dirt, debris or corrosion on the cable as well as the connector. Most of these errors are caused by a bad digitizer. If you can, replace your digitizer with a known good one to make sure that your digitizer is ok. Good Luck

[guide|1125]

ステータス:

open