メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: oldturkey03 ,

テキスト:

@Wolfson. Great detective work my Man :) I ripped one pin of the battery connector from the board and so I appreciate you tracing out where the pins go to as I may be able to superglue that one pin to the board and run a fine magnet wire to where you kindly showed me it goes. I will give it a try over the Christmas holidays and report back with my progress good or bad. We appreciate the time that you took to do this and then thoroughly document it so well complete with many photos. You are a good Ifixit member
[image|1912550]
Thanks again @Wolfson I managed to run a jumper after removing the battery connector and resoldering it to the PCB. Worked like a charm as the two that were ripped off the board were both ground connections Image of repair here and I owe you a beer :)
GND jumper wire connecting two pins and then to GND of IC on other side of board
[image|1912570]
[image|1912571]
GND pin on IC on other side of board
[image|1912572]
+
+
+
+I found new battery sockets here and I am pretty sure that it’s the same as this 5th Gen Ipod but just ordered one to confirm https://www.ebay.com.au/i/323651290234?chn=ps&norover=1&mkevt=1&mkrid=705-139619-5960-0&mkcid=2&itemid=323651290234&targetid=836492011337&device=c&mktype=pla&googleloc=9071949&poi=&campaignid=7787616390&mkgroupid=81654227946&rlsatarget=pla-836492011337&abcId=578876&merchantid=119058601&gclid=CjwKCAiA5JnuBRA-EiwA-0ggPbcb2RQB_d41_jkav7BE24x99sJVqf9v7DM1vRwRLMsYB5LH8lIExBoCjmYQAvD_BwE
+
+Video here https://www.youtube.com/watch?v=zYKKxK_PdcI

ステータス:

open

編集者: oldturkey03 ,

テキスト:

@Wolfson. Great detective work my Man :) I ripped one pin of the battery connector from the board and so I appreciate you tracing out where the pins go to as I may be able to superglue that one pin to the board and run a fine magnet wire to where you kindly showed me it goes. I will give it a try over the Christmas holidays and report back with my progress good or bad. We appreciate the time that you took to do this and then thoroughly document it so well complete with many photos. You are a good Ifixit member
[image|1912550]
+
+Thanks again @Wolfson I managed to run a jumper after removing the battery connector and resoldering it to the PCB. Worked like a charm as the two that were ripped off the board were both ground connections Image of repair here and I owe you a beer :)
+
+GND jumper wire connecting two pins and then to GND of IC on other side of board
+
+[image|1912570]
+
+[image|1912571]
+
+GND pin on IC on other side of board
+
+[image|1912572]

ステータス:

open

編集者: Peter Newman ,

テキスト:

-@Wolfson. Great detective work my Man :) I ripped one pin of the battery connector from the board and so I appreciate you tracing out where the pins go to as I may be able to superglue that one pin to the board and run a fine magnet wire to where you kindly showed me it goes. I will give it a try over the Christmas holidays and report back with my progress good or bad. We appreciate the time that you took to do this and them thoroughly document it so well complete with many photos. You are a good Ifixit member
+@Wolfson. Great detective work my Man :) I ripped one pin of the battery connector from the board and so I appreciate you tracing out where the pins go to as I may be able to superglue that one pin to the board and run a fine magnet wire to where you kindly showed me it goes. I will give it a try over the Christmas holidays and report back with my progress good or bad. We appreciate the time that you took to do this and then thoroughly document it so well complete with many photos. You are a good Ifixit member
[image|1912550]

ステータス:

open

オリジナル投稿者: Peter Newman ,

テキスト:

@Wolfson. Great detective work my Man :) I ripped one pin of the battery  connector from the board and so I appreciate you tracing out where the  pins go to as I may be able to superglue that one pin to the board and  run a fine magnet wire to where you kindly showed me it goes. I will  give it a try over the Christmas holidays and report back with my  progress good or bad. We appreciate the time that you took to do this  and them thoroughly document it so well complete with many photos. You  are a good Ifixit member

[image|1912550]

ステータス:

open