メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

ヘルプ

現在のバージョン作成者: Jack ,

タイトル:

Where does small black plastic fuse holder on the fuser assembly go

テキスト:

I had to take apart the fuser unit on my LaserJet Pro M477 to remove a bad paper jam. In doing so a small 1” black piece of plastic fell out containing what appears to be a fuse (looks a little like a thick SD card). I can’t figure out where it goes. I dont see anything that the contacts on the fuse cartridge would connect to.
 
Any help (or a picture) on where this goes would be appreciated.
 
 
 
Below is a picture of the part. I believe the blue component inside it is a fuse.
 
Aprox dimensions are 1” x .75”
 
[image|1840699]

デバイス:

HP Color LaserJet Pro MFP M277dw

ステータス:

open

アンサーフォーラムの回答が承認:

589216

編集者: Jack ,

タイトル:

Where does small black plastic fuse holder on the fuser assembly go

テキスト:

I had to take apart the fuser unit on my LaserJet Pro M477 to remove a bad paper jam. In doing so a small 1” black piece of plastic fell out containing what appears to be a fuse (looks a little like a thick SD card). I can’t figure out where it goes. I dont see anything that the contacts on the fuse cartridge would connect to.
 
Any help (or a picture) on where this goes would be appreciated.
 
 
 
Below is a picture of the part. I believe the blue component inside it is a fuse.
 
Aprox dimensions are 1” x .75”
 
[image|1840699]

デバイス:

HP Color LaserJet Pro MFP M277dw

ステータス:

open

編集者: Jack ,

タイトル:

WhewWhere does the small black plastic fuse holder on the fuser assembly go
WhewWhere does the small black plastic fuse holder on the fuser assembly go

テキスト:

I had to take apart the fuser unit on my LaserJet Pro M477 to remove a bad paper jam. In doing so a small 1” black piece of plastic fell out containing what appears to be a fuse (looks a little like a thick SD card). I can’t figure out where it goes. I dont see anything that the contacts on the fuse cartridge would connect to.

Any help (or a picture) on where this goes would be appreciated.

デバイス:

HP Color LaserJet Pro MFP M277dw

ステータス:

open

オリジナル投稿者: Jack ,

タイトル:

Whew does the small black plastic fuse holder on the fuser assembly go

テキスト:

I had to take apart the fuser unit on my LaserJet Pro M477 to remove a bad paper jam. In doing so a small 1” black piece of plastic fell out containing what appears to be a fuse (looks a little like a thick SD card). I can’t figure out where it goes. I dont see anything that the contacts on the fuse cartridge would connect to.

Any help (or a picture) on where this goes would be appreciated.

デバイス:

HP Color LaserJet Pro MFP M277dw

ステータス:

open