メインコンテンツにスキップ
ヘルプ

オリジナル投稿者: Sam ,

テキスト:

It is near impossible to replace that is why there is no replacement part. The end that attaches to inside machine goes to a enclosed reel. So you have to remove the  reel and disassemble it both jobs looked very involved. The other end is very hard as well. I came up with a very easy fix you will need to order part  #FA2000-000 from foodsaver. You will need to cut the  hose about a inch from the canister on the new part and the old part. Now you need to splice the two parts with a small tube. I used a 1/4” delrin tube I cut the flared end off and it fits inside both hoses to join them together. Any questions   ssaammss@aol.com

[image|1833688]

[image|1833686]

[image|1833687]

[image|1833690]

[image|1833691]

[image|1833692]

[image|1833689]

ステータス:

open