メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

ヘルプ

オリジナル投稿者: Sebastián LLadó ,

タイトル:

Problem with UP12/E 12v

テキスト:

I need your help because I  have an UP12/E 12v on my sailing boat from  2 years ago.

Since 1 month ago I have this problem detailed in the manual:

''“With solid or slowly flashing red LED, the motor has been short circuited, something may have blocked the gears or there could be a problem in the  connection between the pump and circuit. The red LED flashes for 30 seconds, after which the pump is re-fed up to a maximum of 3 attempts.     On the fourth attempt, the LED remains solid red, the pump is off and should be  checked for possible permanent damage.      To reset this warning you need to reboot the circuit or press the Reset button on the control panel, if  present”.''

When I reset de button on the control panel,goes OK, but the problems repeats some days each  1 or 2 hours and somedays only one or twice a day.

Wich is the final and efective solution for this problem?

I dont know what to do because beig continuosly reseting the control panel is not very comfortable..

Than you in advance.

Sebastián Lladó

デバイス:

Marco UP Series Electric Pump

ステータス:

open