メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

ヘルプ

現在のバージョン作成者: mayer ,

テキスト:

hey man,
 
sorry for the annoyance you are experiencing. I have a couple things you can try..the part that concerns me is its the left shift key. The left shift, option and command keys are all tied in together and its possible its an issue on the logic board, not necessarily the keyboard. The only way to know for sure is dis-connect the keyboard, then plug in another keyboard via usb. If the external keyboard works no problem, chances are replacing the internal keyboard will fix the issue, although keep in mind liquid corrodes over time so the issue may re-surface. If it is the keyboard, I can also provide you some links to purchase a new one, but also a guide how to install (which I am in the process of creating anyways)
 
I've provided a link showing how to remove bottom case (it's 10 screws), just make sure you pay attention at the top which screws went where. It should be from L to R, short screw then 3 long If you put the long in where a short should be, you will screw into the optical drive (don't recomend this! lol)
 
[guide|4315]
 
the keyboard connects via a flex cable. What you want to do is lift the lever and pull it out. Just be very careful to not damage the lever/arm. The photos below show you:
 
photo 1: the connector you are looking for
 
[image|113053|size=thumbnail]
 
photo 2: the lever up and flex cable ready to be removed
 
[image|113054|size=thumbnail]
 
==== Update ==
==== Update ==
 
oneone last thing to mention, you will need to boot the machine from the power pads on the logic board. If you can send mepost a photo of your logic board in that lower corner near the keyboardkeyboard (just edit your question and use the "Images" tab in the lower left hand corner of the screen, I will send youpost the photo back with the power pads circled. It's very easy to do
oneone last thing to mention, you will need to boot the machine from the power pads on the logic board. If you can send mepost a photo of your logic board in that lower corner near the keyboardkeyboard (just edit your question and use the "Images" tab in the lower left hand corner of the screen, I will send youpost the photo back with the power pads circled. It's very easy to do

ステータス:

open

編集者: Josh Aarons ,

テキスト:

hey man,
 
sorry for the annoyance you are experiencing. I have a couple things you can try..the part that concerns me is its the left shift key. The left shift, option and command keys are all tied in together and its possible its an issue on the logic board, not necessarily the keyboard. The only way to know for sure is dis-connect the keyboard, then plug in another keyboard via usb. If the external keyboard works no problem, chances are replacing the internal keyboard will fix the issue, although keep in mind liquid corrodes over time so the issue may re-surface. If it is the keyboard, I can also provide you some links to purchase a new one, but also a guide how to install (which I am in the process of creating anyways)
 
I've provided a link showing how to remove bottom case (it's 10 screws), just make sure you pay attention at the top which screws went where. It should be from L to R, short screw then 3 long If you put the long in where a short should be, you will screw into the optical drive (don't recomend this! lol)
 
[guide|4315]
 
the keyboard connects via a flex cable. What you want to do is lift the lever and pull it out. Just be very careful to not damage the lever/arm. The photos below show you:
 
photo 1: the connector you are looking for
 
[image|113053|size=thumbnail]
 
photo 2: the lever up and flex cable ready to be removed
 
[image|113054|size=thumbnail]
 
== Update ==
 
one last thing to mention, you will need to boot the machine from the power pads on the logic board. If you can send me a photo of your logic board in that lower corner near the keyboard, I will send you the photo back with the power pads circled. It's very easy to do

ステータス:

open

オリジナル投稿者: Josh Aarons ,

テキスト:

hey man,

sorry for the annoyance you are experiencing.  I have a couple things you can try..the part that concerns me is its the left shift key.  The left shift, option and command keys are all tied in together and its possible its an issue on the logic board, not necessarily the keyboard.  The only way to know for sure is dis-connect the keyboard, then plug in another keyboard via usb.  If the external keyboard works no problem, chances are replacing the internal keyboard will fix the issue, although keep in mind liquid corrodes over time so the issue may re-surface.  If it is the keyboard, I can also provide you some links to purchase a new one, but also a guide how to install (which I am in the process of creating anyways)

I've provided a link showing how to remove bottom case (it's 10 screws), just make sure you pay attention at the top which screws went where.  It should be from L to R, short screw then 3 long  If you put the long in where a short should be, you will screw into the optical drive (don't recomend this! lol)

[guide|4315]

the keyboard connects via a flex cable.  What you want to do is lift the lever and pull it out.  Just be very careful to not damage the lever/arm.  The photos below show you:

photo 1: the connector you are looking for

[image|113053|size=thumbnail]

photo 2: the lever up and flex cable ready to be removed

[image|113054|size=thumbnail]

ステータス:

open