メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: dlcatftwin ,

タイトル:

What to do with the digitizer flap when re-assembling

テキスト:

[image|1788108]

Greetings,

My question is regarding step 31 of the iFixit front panel replacement:

[guide|110420]

And it appears that another person had a similar question at this point, with their question left unanswered.

Here’s my question:

The “hinge” part of the digitizer cables (the flap portion) looks like it is supposed to tuck into the crevice between the LCD panel and the side of the aluminum body - my replacement (from iFixit) has sticky contact on the upper side of this flap, making me think that its supposed to adhere to the side of the LCD panel, but the instructions do not make this clear - is my assumption correct?

I’ve attached a picture of the area in question.

Thank you for any response to my query.

Regards,

DLC[br]

デバイス:

iPad 5 LTE

ステータス:

open

承認済み回答:

573202

編集者: dlcatftwin ,

タイトル:

What to do with the digitizer flap when re-assembling

テキスト:

[image|1788108]

Greetings,

My question is regarding step 31 of the iFixit front panel replacement:

[guide|110420]

And it appears that another person had a similar question at this point, with their question left unanswered.

Here’s my question:

The “hinge” part of the digitizer cables (the flap portion) looks like it is supposed to tuck into the crevice between the LCD panel and the side of the aluminum body - my replacement (from iFixit) has sticky contact on the upper side of this flap, making me think that its supposed to adhere to the side of the LCD panel, but the instructions do not make this clear - is my assumption correct?

I’ve attached a picture of the area in question.

Thank you for any response to my query.

Regards,

DLC[br]

デバイス:

iPad 5 LTE

ステータス:

open

承認済み回答:

573202

オリジナル投稿者: dlcatftwin ,

タイトル:

What to do with the digitizer flap when re-assembling

テキスト:

[image|1788108]

Greetings,

My question is regarding step 31 of the iFixit front panel replacement:

[guide|110420]

And it appears that another person had a similar question at this point, with their question left unanswered.

Here’s my question:

The “hinge” part of the digitizer cables (the flap portion) looks like it is supposed to tuck into the crevice between the LCD panel and the side of the aluminum body - my replacement (from iFixit) has sticky contact on the upper side of this flap, making me think that its supposed to adhere to the side of the LCD panel, but the instructions do not make this clear - is my assumption correct?

I’ve attached a picture of the area in question.

Thank you for any response to my query.

Regards,

DLC[br]

デバイス:

iPad 5 LTE

ステータス:

open