メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: Steve Godun ,

テキスト:

I think you're talking about one of these (the black part): https://d3nevzfk7ii3be.cloudfront.net/igi/aNss56gIJvOeRwaB.large
 
If that is indeed what you're talking about, it's not a separate part. It's part of the socket that the ribbon cable fits into. Best case scenario is you only broke the black plastic piece and the rest of the socket is intact, in which case you can try to find the same socket elsewhere, pull the black plastic piece off, and push it into place on your iPod. If the socket itself is damaged, however, the proper repair is to replace the whole socket.
 
Otherwise, look for ways to rig a fix. Put some kaptopkapton tape on one side of the cable to provide pressure, slide/press it into place, then some more tape to hold it in place and hope it doesn't come loose.
Otherwise, look for ways to rig a fix. Put some kaptopkapton tape on one side of the cable to provide pressure, slide/press it into place, then some more tape to hold it in place and hope it doesn't come loose.
 
https://www.ifixit.com/Store/Tools/Polyimide-Tape/IF145-113?o=2[product|IF145-113-2]
https://www.ifixit.com/Store/Tools/Polyimide-Tape/IF145-113?o=2[product|IF145-113-2]

ステータス:

open

編集者: mayer ,

テキスト:

I think you're talking about one of these (the black part): https://d3nevzfk7ii3be.cloudfront.net/igi/aNss56gIJvOeRwaB.large
 
If that is indeed what you're talking about, it's not a separate part. It's part of the socket that the ribbon cable fits into. Best case scenario is you only broke the black plastic piece and the rest of the socket is intact, in which case you can try to find the same socket elsewhere, pull the black plastic piece off, and push it into place on your iPod. If the socket itself is damaged, however, the proper repair is to replace the whole socket.
 
Otherwise, look for ways to rig a fix. Put some kaptop tape on one side of the cable to provide pressure, slide/press it into place, then some more tape to hold it in place and hope it doesn't come loose.
 
https://www.ifixit.com/Store/Tools/Polyimide-Tape/IF145-113?o=2

ステータス:

open

オリジナル投稿者: Steve Godun ,

テキスト:

I think you're talking about one of these (the black part): https://d3nevzfk7ii3be.cloudfront.net/igi/aNss56gIJvOeRwaB.large

If that is indeed what you're talking about, it's not a separate part. It's part of the socket that the ribbon cable fits into. Best case scenario is you only broke the black plastic piece and the rest of the socket is intact, in which case you can try to find the same socket elsewhere, pull the black plastic piece off, and push it into place on your iPod. If the socket itself is damaged, however, the proper repair is to replace the whole socket.

Otherwise, look for ways to rig a fix. Put some kaptop tape on one side of the cable to provide pressure, slide/press it into place, then some more tape to hold it in place and hope it doesn't come loose.

ステータス:

open