メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

ヘルプ

現在のバージョン作成者: Quinn ,

タイトル:

iPad 5 charges when powered off; testing data included

テキスト:

I have two iPad 5th generation tablets (data/GPS), one 10 W OEM charger and one 12 W OEM charger with many OEM lightning cables.[br]

[br]

One of the iPads charges very slowly and only in a certain connection.  I bought it used with this problem.  It otherwise functions normally with normal battery life and battery % display is normal.  I have not opened it but there is no obvious sign of damage.  The charge port was cleaned by me but not much was pulled out.  The contacts were lightly cleaned with IPA, no obvious sign of damage to the contacts is seen either. I haven't had any trouble syncing/backing up with iTunes.  A DFU restore was also performed but made no difference.[br]

[br]

Using a USB ammeter which also gives the state of the data lines, the following info was gathered.  The ipad is approximately 55% charged during these tests.  Similar results are found with the 10 W charger and combinations of charger/cable.  The other tablet charges just fine with these accessories.[br]

[br]

12 W charger; no device plugged in[br]

A:  0A[br]

V-: 0V[br]

D-: 2.77V[br]

D+: 2.76V[br]

V+: 5.18V[br]

Ohms:  999.9[br]

Watts: 0W[br]

[br]

12 W charger; faulty iPad powered on, same result if in sleep or wake state[br]

A:  0A[br]

V-: 0V[br]

D-: 2.74V[br]

D+: 0.07V[br]

V+: 5.18V[br]

Ohms: 999.9[br]

Watts: 0W[br]

note: Upon plugging in, the iPad briefly wakes up and displays "Unlock iPad to use accessories"; no charging icon is seen.[br]

note2: sometimes the result of this test was:[br]

A:  0.06A[br]

V-: 0V[br]

D-: 2.74V[br]

D+: 0.09V[br]

V+: 5.18V[br]

Ohms: 86.33[br]

Watts: 0.31W[br]

with no "unlock" notification but still no charging icon[br]

[br]

12 W charger; faulty iPad powered off after plugging in to charge (if I plugged the tablet in when it was powered off, it would power on)[br]

A:  0.47A[br]

V-: 0V[br]

D-: 2.65V[br]

D+: 0.21V[br]

V+: 5.17V[br]

Ohms: 11[br]

Watts: 2.42W[br]

[br]

MacBook Pro; no device plugged in[br]

A:  0A[br]

V-: 0V[br]

D-: 0V[br]

D+: 0V[br]

V+: 5.03V[br]

Ohms: 999[br]

Watts: 0W[br]

[br]

MacBook Pro; faulty iPad powered on but in sleep state[br]

A:  0A[br]

V-: 0V[br]

D-: 0V[br]

D+: 0V[br]

V+: 5.03V[br]

Ohms: 999[br]

Watts: 0W[br]

note: Upon plugging in, the iPad briefly wakes up and displays "Unlock iPad to use accessories" notification pops up[br]

[br]

MacBook Pro; faulty iPad powered on but in wake state (screen is unlocked)[br]

A:  0.95A[br]

V-: 0V[br]

D-: 0.16V[br]

D+: 0.17V[br]

V+: 4.86V[br]

Ohms: 5.11[br]

Watts: 4.61W[br]

[br]

MacBook Pro; faulty iPad powered off[br]

A:  0.47A[br]

V-: 0V[br]

D-: 0V[br]

D+: 0.14V[br]

V+: 4.95V[br]

Ohms: 10.53[br]

Watts: 2.32W[br]

[br]

The results on the MacBook were similar for both iPads.[br]

[br]

With the charger, the normal iPad charges like this:[br]

[br]

12 W charger; normal iPad powered on but in sleep state[br]

A:  2.00A[br]

V-: 0V[br]

D-: 2.65V[br]

D+: 2.65V[br]

V+: 5.13V[br]

Ohms: 2.6[br]

Watts: 10.1W[br]

note: no notification pops up[br]

[br]

12 W charger; normal iPad powered off after plugging in to charge[br]

A:  1.89A[br]

V-: 0V[br]

D-: 2.65V[br]

D+: 2.65V[br]

V+: 5.13V[br]

Ohms: 2.7[br]

Watts: 9.7[br]

[br]

It seems there may be a problem on the D+ line.  It drops to low voltage when a charger is plugged into the faulty iPad.  I think this then makes the iPad think it shouldn't draw much power.  The best way to charge (0.5 A) is from a charger when powered off.[br]

[br]

If this is definitely a tristar/tigris problem, I probably won't attack it myself but if you think this could be a connector problem then I may try to fix it myself.[br]

[br]

Thanks for any help.

デバイス:

iPad 5 LTE

ステータス:

open

承認された回答:

567074

オリジナル投稿者: Quinn ,

タイトル:

iPad 5 charges when powered off; testing data included

テキスト:

I have two iPad 5th generation tablets (data/GPS), one 10 W OEM charger and one 12 W OEM charger with many OEM lightning cables.[br]

[br]

One of the iPads charges very slowly and only in a certain connection.  I bought it used with this problem.  It otherwise functions normally with normal battery life and battery % display is normal.  I have not opened it but there is no obvious sign of damage.  The charge port was cleaned by me but not much was pulled out.  The contacts were lightly cleaned with IPA, no obvious sign of damage to the contacts is seen either. I haven't had any trouble syncing/backing up with iTunes.  A DFU restore was also performed but made no difference.[br]

[br]

Using a USB ammeter which also gives the state of the data lines, the following info was gathered.  The ipad is approximately 55% charged during these tests.  Similar results are found with the 10 W charger and combinations of charger/cable.  The other tablet charges just fine with these accessories.[br]

[br]

12 W charger; no device plugged in[br]

A:  0A[br]

V-: 0V[br]

D-: 2.77V[br]

D+: 2.76V[br]

V+: 5.18V[br]

Ohms:  999.9[br]

Watts: 0W[br]

[br]

12 W charger; faulty iPad powered on, same result if in sleep or wake state[br]

A:  0A[br]

V-: 0V[br]

D-: 2.74V[br]

D+: 0.07V[br]

V+: 5.18V[br]

Ohms: 999.9[br]

Watts: 0W[br]

note: Upon plugging in, the iPad briefly wakes up and displays "Unlock iPad to use accessories"; no charging icon is seen.[br]

note2: sometimes the result of this test was:[br]

A:  0.06A[br]

V-: 0V[br]

D-: 2.74V[br]

D+: 0.09V[br]

V+: 5.18V[br]

Ohms: 86.33[br]

Watts: 0.31W[br]

with no "unlock" notification but still no charging icon[br]

[br]

12 W charger; faulty iPad powered off after plugging in to charge (if I plugged the tablet in when it was powered off, it would power on)[br]

A:  0.47A[br]

V-: 0V[br]

D-: 2.65V[br]

D+: 0.21V[br]

V+: 5.17V[br]

Ohms: 11[br]

Watts: 2.42W[br]

[br]

MacBook Pro; no device plugged in[br]

A:  0A[br]

V-: 0V[br]

D-: 0V[br]

D+: 0V[br]

V+: 5.03V[br]

Ohms: 999[br]

Watts: 0W[br]

[br]

MacBook Pro; faulty iPad powered on but in sleep state[br]

A:  0A[br]

V-: 0V[br]

D-: 0V[br]

D+: 0V[br]

V+: 5.03V[br]

Ohms: 999[br]

Watts: 0W[br]

note: Upon plugging in, the iPad briefly wakes up and displays "Unlock iPad to use accessories" notification pops up[br]

[br]

MacBook Pro; faulty iPad powered on but in wake state (screen is unlocked)[br]

A:  0.95A[br]

V-: 0V[br]

D-: 0.16V[br]

D+: 0.17V[br]

V+: 4.86V[br]

Ohms: 5.11[br]

Watts: 4.61W[br]

[br]

MacBook Pro; faulty iPad powered off[br]

A:  0.47A[br]

V-: 0V[br]

D-: 0V[br]

D+: 0.14V[br]

V+: 4.95V[br]

Ohms: 10.53[br]

Watts: 2.32W[br]

[br]

The results on the MacBook were similar for both iPads.[br]

[br]

With the charger, the normal iPad charges like this:[br]

[br]

12 W charger; normal iPad powered on but in sleep state[br]

A:  2.00A[br]

V-: 0V[br]

D-: 2.65V[br]

D+: 2.65V[br]

V+: 5.13V[br]

Ohms: 2.6[br]

Watts: 10.1W[br]

note: no notification pops up[br]

[br]

12 W charger; normal iPad powered off after plugging in to charge[br]

A:  1.89A[br]

V-: 0V[br]

D-: 2.65V[br]

D+: 2.65V[br]

V+: 5.13V[br]

Ohms: 2.7[br]

Watts: 9.7[br]

[br]

It seems there may be a problem on the D+ line.  It drops to low voltage when a charger is plugged into the faulty iPad.  I think this then makes the iPad think it shouldn't draw much power.  The best way to charge (0.5 A) is from a charger when powered off.[br]

[br]

If this is definitely a tristar/tigris problem, I probably won't attack it myself but if you think this could be a connector problem then I may try to fix it myself.[br]

[br]

Thanks for any help.

デバイス:

iPad 5 LTE

ステータス:

open