メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: lauhub ,

テキスト:

Hi,
 
Same problem with my brother's MBA. I disconnected the camera connector ([guide|6361|step 12 of this guide|stepid=27448])
 
It then started seamlessly. I cleaned the camera connector with iso-propanol, and I reconnected the camera connector: it started too :)connector.
It then started seamlessly. I cleaned the camera connector with iso-propanol, and I reconnected the camera connector: it started too :)connector.
 
I then performed a SMC + PRAM reset and it seems working for nowIt started successfully too.
I then performed a SMC + PRAM reset and it seems working for nowIt started successfully too.
 
So good news:I then performed a SMC + PRAM reset and it may not be necessary to change the LCD assembly, just disconnect camera, boot, turn off and reconnect cameraseems working for now.
So good news:I then performed a SMC + PRAM reset and it may not be necessary to change the LCD assembly, just disconnect camera, boot, turn off and reconnect cameraseems working for now.

ステータス:

open

オリジナル投稿者: lauhub ,

テキスト:

Hi,

Same problem with my brother's MBA. I disconnected the camera connector ([guide|6361|step 12 of this guide|stepid=27448])

It then started seamlessly. I reconnected the camera connector: it started too :)

I then performed a SMC + PRAM reset and it seems working for now.

So good news: it may not be necessary to change the LCD assembly, just disconnect camera, boot, turn off and reconnect camera.

ステータス:

open