メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: Charles Fisher ,

テキスト:

Hello, I will agree with the others here. You either have a display going bad or the LCD cable the connected to the logic board is faulty (it could be at either end of that cable). Also check the connections (wires) on that enverter board as well.
 
== Update ==
 
Hi, in going with the assumption that the logic board you had replaced was supplied by a reputable supplier (with some type of a warranty on it)it will safe to say that you internal monitor is "on-the-fritz." A replacement screen should completely resolve your issue, just make sure that you get one that is compatable with your model.

ステータス:

open

オリジナル投稿者: Charles Fisher ,

テキスト:

Hello,  I will agree with the others here. You either have a display going bad or the LCD cable the connected to the logic board is faulty (it could be at either end of that cable). Also check the connections (wires) on that enverter board as well.

ステータス:

open