Skip to main content
Help

Current version by: oldturkey03 ,

タイトル:

Solder pads came off in attempt to replace switches (deathadder elite)

Text:

I know this has been covered a handful of times, but I want to know if my solution will work. I actually have some experience with soldering/desoldering, but for some reason with this one, things didn’t go as planned.
 
This is is the tutorial I am using: https://youtu.be/cTnVg6Pmf-U
 
here is the pic of the holes (colored red) I messed up: http://imgur.com/GmmsX7l
 
[image|1528291]
 
Basically, I want to connect the pins from the new micro switches to the exposed copper that I’ve already scraped in the picture.
 
For the middle hole, I can see the wire trace leading to 2 very tiny soldered pads on the other side of the pcb. Would I lead a wire these holes instead (just for the middle hole)?

デバイス:

Razer Deathadder Chroma

Status:

open

Edit by: Eric ,

タイトル:

Solder pads came off in attempt to replace switches (deathadder elite)

Text:

I know this has been covered a handful of times, but I want to know if my solution will work. I actually have some experience with soldering/desoldering, but for some reason with this one, things didn’t go as planned.
 
This is is the tutorial I am using: https://youtu.be/cTnVg6Pmf-U
 
here is the pic of the holes (colored red) I messed up: http://imgur.com/GmmsX7l
 
Basically, I want to connect the pins from the new micro switches to the exposed copper that I’ve already scraped in the picture.
 
For the middle hole, I can see the wire trace leading to 2 very tiny soldered pads on the other side of the pcb. Would I lead a wire to one of these holes instead (just for this hole insteadthe middle hole)?
For the middle hole, I can see the wire trace leading to 2 very tiny soldered pads on the other side of the pcb. Would I lead a wire to one of these holes instead (just for this hole insteadthe middle hole)?

デバイス:

Razer Deathadder Chroma

Status:

open

Edit by: Eric ,

タイトル:

Solder pads came off in attempt to replace switches (deathadder elite)

Text:

I know this has been covered a handful of times, but I want to know if my solution will work. I actually have some experience with soldering/desoldering, but for some reason with this one, things didn’t go as planned.
 
This is is the tutorial I am using: https://youtu.be/cTnVg6Pmf-U
 
here is the pic of the holes (colored red) I messed up: http://imgur.com/GmmsX7l
 
Basically, I want to connect the pins from the new micro switches to the exposed copper that I’ve already scraped in the picture. Will this work? If it does not, how much will it be estimated if I take it

For the middle hole, I can see the wire trace leading
to 2 very tiny soldered pads on the other side of the pcb. Would I lead a electronic shopwire to one of these for this hole instead?
Basically, I want to connect the pins from the new micro switches to the exposed copper that I’ve already scraped in the picture. Will this work? If it does not, how much will it be estimated if I take it

For the middle hole, I can see the wire trace leading
to 2 very tiny soldered pads on the other side of the pcb. Would I lead a electronic shopwire to one of these for this hole instead?

デバイス:

Razer Deathadder Chroma

Status:

open

Original post by: Eric ,

タイトル:

Solder pads came off in attempt to replace switches (deathadder elite)

Text:

I know this has been covered a handful of times, but I want to know if my solution will work. I actually have some experience with soldering/desoldering, but for some reason with this one, things didn’t go as planned.

This is is the tutorial I am using: https://youtu.be/cTnVg6Pmf-U

here is the pic of the holes (colored red) I messed up: http://imgur.com/GmmsX7l

Basically, I want to connect the pins from the new micro switches to the exposed copper that I’ve already scraped in the picture. Will this work? If it does not, how much will it be estimated if I take it to a electronic shop?

デバイス:

Razer Deathadder Chroma

Status:

open