メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: oldturkey03 (投票の詳細) ,

タイトル:

Kitchenaid Speed 2 too fast, can't adjust it

テキスト:

Hello everybody!

I bought an KSM150 which  was bought in the Unites States around 2005. For using it here in Germany I use a Converter from 230 V to 120 V which works perfectly.

My problem is, that speed 2 is nearly twice as fast as it should be, speed 2 , 6 and 8 are nearly the same and speed 10 is a lot faster. I tried to adjust it, what didn't work. So i bought a new phase control board and replaced the old one, sadly without an effect.

Do you think it's the speed control plate or could it also be the Mixer Motor Governor which causes the problem?

Thanks for your help,

Alex

デバイス:

KitchenAid KSM150PSER

ステータス:

open

承認された回答:

528901

編集者: Alex nordhoff ,

タイトル:

SpeedKitchenaid Speed 2 too fast, can't adjust it
SpeedKitchenaid Speed 2 too fast, can't adjust it

テキスト:

Hello everybody!

I bought an KSM150 which  was bought in the Unites States around 2005. For using it here in Germany I use a Converter from 230 V to 120 V which works perfectly.

My problem is, that speed 2 is nearly twice as fast as it should be, speed 2 , 6 and 8 are nearly the same and speed 10 is a lot faster. I tried to adjust it, what didn't work. So i bought a new phase control board and replaced the old one, sadly without an effect.

Do you think it's the speed control plate or could it also be the Mixer Motor Governor which causes the problem?

Thanks for your help,

Alex

デバイス:

KitchenAid KSM150PSER

ステータス:

open

オリジナル投稿者: Alex nordhoff ,

タイトル:

Speed 2 too fast, can't adjust it

テキスト:

Hello everybody!

I bought an KSM150 which  was bought in the Unites States around 2005. For using it here in Germany I use a Converter from 230 V to 120 V which works perfectly.

My problem is, that speed 2 is nearly twice as fast as it should be, speed 2 , 6 and 8 are nearly the same and speed 10 is a lot faster. I tried to adjust it, what didn't work. So i bought a new phase control board and replaced the old one, sadly without an effect.

Do you think it's the speed control plate or could it also be the Mixer Motor Governor which causes the problem?

Thanks for your help,

Alex

デバイス:

KitchenAid KSM150PSER

ステータス:

open