メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

ヘルプ

現在のバージョン作成者: oldturkey03 ,

テキスト:

@steveyv shine a light at an angle across the LCD. See if you can make out silhouettes. This will verify if it is your backlight., Most likely so you need a new LCD but if you see silhouettes etc. it is possible that you have a board error on PD-237 which is the LCD/backlight driver board. Here is how you get to the LCD
 
[image|1433416]
 
[image|1433417]
 
[image|1433415]
 
[image|1433427]
If
If
you find that it is your backlight that is not working check CN608 on the PCD PD-237. Pin 6 should have 2.6V and pin 3 -15.5 Let us know what you find and post some good pictures of your camera if you need assistance with indetificat inoidentification etc. Use this guide https://www.ifixit.com/Guide/Adding+images+to+an+existing+question/21499#comment-417084[guide|21499|commentid=417084] for that
replacement LCD's are available at ebay etc.
If
If
you find that it is your backlight that is not working check CN608 on the PCD PD-237. Pin 6 should have 2.6V and pin 3 -15.5 Let us know what you find and post some good pictures of your camera if you need assistance with indetificat inoidentification etc. Use this guide https://www.ifixit.com/Guide/Adding+images+to+an+existing+question/21499#comment-417084[guide|21499|commentid=417084] for that
replacement LCD's are available at ebay etc.

ステータス:

open

編集者: oldturkey03 ,

テキスト:

@steveyv shine a light at an angle across the LCD. See if you can make out silhouettes. This will verify if it is your backlight., Most likely so you need a new LCD but if you see silhouettes etc. it is possible that you have a board error on PD-237 which is the LCD/backlight driver board. Here is how you get to the LCD
 
[image|1433416]
 
[image|1433417]
 
[image|1433415]

Rep: 1
[image|1433427]
If you find that it is your backlight that is not working check CN608 on the PCD PD-237. Pin 6 should have 2.6V and pin 3 -15.5 Let us know what you find and post some good pictures of your camera if you need assistance with indetificat ino etc. Use this guide https://www.ifixit.com/Guide/Adding+images+to+an+existing+question/21499#comment-417084 for that

Rep: 1
[image|1433427]
If you find that it is your backlight that is not working check CN608 on the PCD PD-237. Pin 6 should have 2.6V and pin 3 -15.5 Let us know what you find and post some good pictures of your camera if you need assistance with indetificat ino etc. Use this guide https://www.ifixit.com/Guide/Adding+images+to+an+existing+question/21499#comment-417084 for that

ステータス:

open

オリジナル投稿者: oldturkey03 ,

テキスト:

@steveyv shine a light at an angle across the LCD. See if you can make out silhouettes. This will verify if it is your backlight., Most likely so you need a new LCD but if you see silhouettes etc. it is possible that you have a board error on PD-237 which is the LCD/backlight driver board. Here is how you get to the LCD

[image|1433416]

[image|1433417]

[image|1433415]

Rep: 1

ステータス:

open