メインコンテンツにスキップ
ヘルプ

オリジナル投稿者: Jens Mander ,

テキスト:

Hi Benjamin,

Funny enough, I bought one used a few days ago, but it wouldn't play tapes. I just took it apart. The belts were still in place put became slack and would not create enough friction to move the wheels.  There are two belts, one under the green circuit board, one to the side. You have to do the bottom one first as it runs on the bottom of the big silver "flywheel". I had to unscrew three black screws to lift the circuit board.

Black screws

[image|1413005]

Bottom belt

[image|1413006]

Top belt

[image|1413004]

As you can see from my photos, I tried with standard household rubber belts. I think they are to short and a bit to tight. Tapes play, but rather slow. I'll be ordering some belts as suggested by @avanteguarde and see if that helps.

Good luck and let me know how it goes.

Best,

Jens

ステータス:

open