メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: Ryan ,

テキスト:

Actually they are compatable...
 
BUT it seems some are not compatable with iOS 4... sounds strange. i know
 
here's something to read [http://www.ifixit.com/Answers/View/28809/Try+to+restore+get+a+error+29|http://www.ifixit.com/Answers/View/28809/Try+to+restore+get+a+error+29]
 
you can change the circuit board of the battery pretty easily though
 
 
edit : To Change the board---
 
you need a battery that is good but has the wrong number, and a bad battery with the right numbers or just the right battery board
 
- peel off the yellow tape from the bottom of the battery- carefull not to tear the power ribbon
 
- with the sticky side of the battery up... and the board end facing away from you.... the board will kinda unfold (away from you) from the battery
 
- you will see 2 metal strips connected to the board... and you will notice they are folded a couple times near the board... unfold the strips as much as you can,
 
-break the strips off as close to board as you can. but don't totally rip the metal off the board.
 
-solder the good board to the strips of the good board.

note

note
- i havn't tested this yet but as far as i can tell it should workwork.

Noting oldturkey's comment it's probably better to just get another battery, there not that expensive anyways

note

note
- i havn't tested this yet but as far as i can tell it should workwork.

Noting oldturkey's comment it's probably better to just get another battery, there not that expensive anyways

ステータス:

open

編集者: Ryan ,

テキスト:

Actually they are compatable...
 
BUT it seems some are not compatable with iOS 4... sounds strange. i know
 
here's something to read [http://www.ifixit.com/Answers/View/28809/Try+to+restore+get+a+error+29|http://www.ifixit.com/Answers/View/28809/Try+to+restore+get+a+error+29]
 
you can change the circuit board of the battery pretty easily though
 
 
edit : To Change the board---
 
you need a battery that is good but has the wrong number, and a bad battery with the right numbers or just the right battery board
 
- peel off the yellow tape from the bottom of the battery- carefull not to tear the power ribbon
- with the sticky side of the battery up... and the board end facing away from you.... the board will kinda unfold (away from you) from the battery
- you will see 2 metal strips connected to the board... and you will notice they are folded a couple times near the board... unfold the strips as much as you can,
-break the strips off as close to board as you can. but don't totally rip the metal off the board.
-solder the good board to the strips of the good board.
note - i havn't tested this yet but as far as i can tell it should work

ステータス:

open

オリジナル投稿者: Ryan ,

テキスト:

Actually they are compatable...

BUT it seems some are not compatable with iOS 4... sounds strange. i know

here's something to read [http://www.ifixit.com/Answers/View/28809/Try+to+restore+get+a+error+29|http://www.ifixit.com/Answers/View/28809/Try+to+restore+get+a+error+29]

you can change the circuit board of the battery pretty easily though

ステータス:

open