メインコンテンツにスキップ
ヘルプ

現在のバージョン作成者: Stephen Svoboda ,

タイトル:

Reconnect ribbon cable assembly

テキスト:

Instructions say to reverse disassembly steps. Step in question says to "flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board ... Pull the headphone jack assembly cable straight out of its socket on the logic board."

How do I push the cable ends back under the retaining flaps? They do not slide back under easily and I do not want to damage the cable.

デバイス:

iPad 4 Wi-Fi

ステータス:

open

承認済み回答:

463388

オリジナル投稿者: Stephen Svoboda ,

タイトル:

Reconnect ribbon cable assembly

テキスト:

Instructions say to reverse disassembly steps. Step in question says to "flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board ... Pull the headphone jack assembly cable straight out of its socket on the logic board."

How do I push the cable ends back under the retaining flaps? They do not slide back under easily and I do not want to damage the cable.

デバイス:

iPad 4 Wi-Fi

ステータス:

open