ヘルプ

現在のバージョン作成者: Dan ,

テキスト:

You'll need to get a rubber stopper used to seal bottles. Review this chart: [https://www.hvchemical.com/stopper-size-chart/?___store=default&_vsrefdom=adwords&gclid=CjwKCAiAtorUBRBnEiwAfcp_YyjrL8cCqtzUVwhGtoh9jrQoIC7sV8MHeK7ph5lfN6UoToaAinEygBoCu6sQAvD_BwE|Rubber Stopper Size Chart] to figure out what would be the ideal size. You'll also need to modify it as the center part of the stopper needs to be ground down so it does not touch the lens as the filler in the stopper is abrasive and will scratch the lens. I've used a [https://www.dremel.com/en_US/homepage|Dremel Tool]. I find the stoppers with the center hole are easier to hollow out as the hole offers a good reference and starting point.
 
Once you've made the tool you'll just press down on it just enough for it not to slip and then turn. Don't press to hard as you don't want to bind the threads

ステータス:

open

オリジナル投稿者: Dan ,

テキスト:

You'll need to get a rubber stopper used to seal bottles. Review this chart: [https://www.hvchemical.com/stopper-size-chart/?___store=default&_vsrefdom=adwords&gclid=CjwKCAiAtorUBRBnEiwAfcp_YyjrL8cCqtzUVwhGtoh9jrQoIC7sV8MHeK7ph5lfN6UoToaAinEygBoCu6sQAvD_BwE|Rubber Stopper Size Chart] to figure out what would be the ideal size. You'll also need to modify it as the center part of the stopper needs to be ground down so it does not touch the lens as the filler in the stopper is abrasive and will scratch the lens. I've used a [https://www.dremel.com/en_US/homepage|Dremel Tool]. I find the stoppers with the center hole are easier to hollow out as the hole offers a good reference and starting point.

ステータス:

open